Your trusty wash and work stand has tirelessly held onto your bike(s) hundreds of times so you can freely use both hands to wash, fiddle, adjust, and dial in your favorite ride to keep it in tip top shape, but when is the last time you gave your stand a little love in return? The nice thing about our line of bike repair stands is that they don’t require much, but with a little bit of TLC and inspection of potentially worn parts, you can keep your stand functioning like the first day you laid eyes on each other. If you’re into bike maintenance and keeping everything in tip-top shape–why not include your bike repair stand? Read on to find out how to keep things wash and work running smoothly, which leads to your bike running smoothly, which in turn leads to adorable canines and world peace.
Now that your stand is dirty from the grime that has come off of your bike from a good season of riding, here are a few helpful tips and tricks to get your stand dialed so you can focus on keeping your bike clean and happy.
Clean it up.
Feedback Sports repair stands are made from premium materials to stand up to the elements, so they aren’t afraid of a little soap and water. Some basic Dawn dish soap in a bucket of warm water will serve as a safe and friendly cleaning agent that’s both easy on the stand and your hands. A soft brush such as the one that you use for cleaning your bike is typically sufficient for removing grime around moving parts and will be easy on your stand’s finish.
(PRO tip: Instead of adding soap first then adding water to create the bubbles, reverse the process by adding soap to water and allowing it to dissolve for a moment. A shot of pressured water will agitate the solution and give you bubbles that will last exponentially longer and be more effective for cleaning).
Shake and dry.
After you give your stand a sudsy bath, grab onto the main center tubes and give the stand a good shake to get some water off of the surfaces. A drop motion followed by an abrupt stop is typically a good method for shaking some of the water off. Follow up with a soft and absorbent cloth over all of the main surfaces to remove any grime you may have missed in the washing phase. Letting your stand hang out in the warmth of the sun will allow all of the non-reachable places to dry out entirely.
(Sunglasses optional; however, your stand does appreciate stylish accessories to accentuate it’s already silky good looks).
Keep things moving freely.
Your repair stand has moving parts that like to stay moving freely. Keeping these moving parts lubricated periodically will protect them during repeated wash cycles and make your life easier when it comes time to setting your stand up or folding it back down. Give a drop of chain lube to areas such as the barrel nut inside the QR levers or the cam interface of the QR to make the actuation smoother. Follow up with a rag to pick up any excess chain lube that may have dripped.
(Note: Don’t lubricate the main telescoping tube as it will not have sufficient grip for keeping your bike suspended in the spot you want it).
Take a closer look.
Once everything has been cleaned up, a good once over to see how your parts are wearing is a good idea. Pay attention to rubber foot plugs and clamp jaws as they typically see the most amount of wear on the stand. Having some spare parts in your toolbox is a nice way to minimize any downtime in case something does need to be replaced from wear. Replacement parts can be found at the following link: Work Stand Replacement Parts .
Enjoy a cold one.
Finally, don’t forget to grab a cold drink and use your stand’s bottle opener to access the delicious contents inside. Sit back, relax, and take a moment to marvel over your freshly cleaned ride and repair stand.